AN/PVS-7

AN/PVS-7
Product Page
Manufacturer(s)	Elbit Systems Of America (F5001)
Type	Bi-ocular
Tube Format	MX-10130
FoV	40° / 40°
Mount	Bayonet
Objective(s)	Proprietary
Eyepiece(s)	Proprietary

The AN/PVS-7 is the JETDS designation for a bi-ocular housing named M972 / M973 that was produced by Litton Industries for the U.S. armed forces.

It has been replaced by the AN/PVS-14, but is still being produced by Elbit Systems Of America.

Collimator

• 

  A AN/PVS-7 collimator assembly, comprised of multiple lenses and a triangular prism to duplicate the output image from one MX-10130 tube into both oculars

• 

  When disassembling, lenses and metal rings come out in the indicated order (left first, right last)

• 

  Step 1: Insert the lens with the convex side facing towards the collimator housing

• 

  Step 2: Insert one of the thick metal rings

• 

  Step 3: Insert the thick lens, convex side facing towards the collimator housing

• 

  Step 4.1: Three components needed to be placed together in a bundle

• 

  Step 4.2: Place the metal ring onto a flat surface for convenience

• 

  Step 4.3: Place the lens onto the metal ring with the convex side facing towards it

• 

  Step 4.4: Place the thin metal ring onto the lens

• 

  Step 4.5: The final result should look like this with each component stacked according to their collerated numbers from 4.1

• 

  Step 5: Insert the fully stacked components from step 4 with the thin metal ring facing towards the collimator housing

• 

  Step 6: Insert the final lens into the collimator housing with the convex side facing outward

• 

  Step 7: Screw in the lock ring to securely all the components in place